BLUETTI PV200
A sturdy, well‑proven 200 W panel with standard MC4 plugs and adjustable legs. Heavier than newer designs and without USB ports.
- Rated power
- 200W
- Efficiency
- 23.4%
- Weight
- 17.2lb
- Bifacial
- No
We earn a commission when you buy through our Amazon links, at no extra cost to you.
The PV200 has been BLUETTI’s go‑to portable panel for years. It uses monocrystalline cells rated at up to 23.4% with an ETFE coating, folds to about two feet square and weighs 17.2 lb. Three of its four sections have fold‑out legs, with a strap to set the tilt.
The Gadgeteer measured between 92 W and 173 W under passing clouds, around 160–165 W on average, enough to refill a small BLUETTI station in about three hours. It uses standard MC4 connectors, so it works with most brands, but it has no USB ports and only the junction box is rated IP65.
Pros
- Strong, consistent output in tests
- Standard MC4 connectors
- Solid build and adjustable legs
- Over 1,200 Amazon ratings
Cons
- Heavier than newer 200 W panels (17.2 lb)
- No USB ports
- Only the junction box is water‑rated
- Awkward to set up alone
Who it’s for
- BLUETTI AC180 and Elite owners
- Car camping where weight matters less
- Buyers who prefer a proven design
Technical specifications
| Rated power | 200 W |
|---|---|
| Efficiency | 23.4% |
| Cell type | Monocrystalline |
| Bifacial | No |
| Weight | 17.2 lb (7.8 kg) |
| Power per kg | 25.6 W/kg |
| Folded size | 22.5 × 23.6 × 2.9 in |
| Open‑circuit voltage (Voc) | 24.6 V |
| Connector | MC4 |
| Water resistance | — |
| USB charging | No |
Performance profile
Scores are calculated from published specs on a 0–10 scale. Versatility adds points for bifacial cells, built‑in USB, IP68 and standard MC4 connectors.
How fast does it charge each station?
| Station | Capacity | Time to full |
|---|---|---|
| EcoFlow RIVER 3 * | 245 Wh | 3.2 hlimited by station input (110 W) |
| Anker SOLIX C300 DC * | 288 Wh | 4.1 hlimited by station input (100 W) |
| Jackery Explorer 500 v2 | 512 Wh | 3.7 h |
| EcoFlow DELTA 3 Plus | 1,024 Wh | 7.3 h |
| Anker SOLIX C1000 Gen 2 | 1,024 Wh | 7.3 h |
| BLUETTI Elite 100 V2 | 1,024 Wh | 7.3 h |
| EcoFlow DELTA 3 Classic | 1,024 Wh | 7.3 h |
| DJI Power 1000 V2 | 1,024 Wh | 7.3 h |
| Jackery Explorer 1000 v2 | 1,070 Wh | 7.6 h |
| BLUETTI AC180 | 1,152 Wh | 8.2 h |
| Jackery Explorer 2000 v2 | 2,042 Wh | 15 h |
| DJI Power 2000 | 2,048 Wh | 15 h |
| BLUETTI Elite 200 V2 | 2,074 Wh | 15 h |
| Anker SOLIX F3000 | 3,072 Wh | 22 h |
| EcoFlow DELTA Pro 3 | 4,096 Wh | 29 h |
Estimated at 70% of rated power to account for clouds, angle and heat. Stations marked * accept less solar power than the panel can give, so they cap the speed.
Before you buy: check that the panel’s connector fits your station (or buy the adapter) and that its open‑circuit voltage (Voc) is within the station’s solar input range. Panels can be wired in series or parallel to add power if the station allows it.
What reviewers and owners say
The Gadgeteer called it reasonably portable with strong output and solid construction, but missed USB ports and found it heavy and awkward to set up alone. On Amazon it averages 4.4 out of 5 across more than 1,200 ratings.
Sources: The Gadgeteer
BLUETTI PV200
A sturdy, well‑proven 200 W panel with standard MC4 plugs and adjustable legs. Heavier than newer designs and without USB ports.